Speaker / Subwoofer
Speaker / Subwoofer
Sort by
Show result
  • Frequency response: 250Hz - 20kHz
  • Overall dimensions: 91mm
  • Cut-out diameter: 75mm
  • Mounting depth: 30.7mm
  • Nominal Power Handling: 15 watts
  • Nominal Impedance: 4 Ohms
  • Sensitivity: dB/w/m
  • Max linear excursion: +/-0.5mm
  • Minimum recommended sealed volume: 500-1000ml
RM3,188.00

BRAHMA T1 Specifications: 

  • Frequency Response: 3000Hz - 20,000kHz
  • Overall diameter: 52 mm
  • Cut-out diameter: 45 mm
  • Mounting depth: 32 mm
  • Nominal Power Handling: 8 watts
  • Nominal Impedance: 4 Ohms
  • Sensitivity: 91 dB/w/m
  • Max linear excursion: +/- .6 mm

BRAHMA V2 Specifications:

  • Frequency Response: 200Hz - 20,000kHz
  • Overall diameter: 74 mm
  • Cut-out diameter: 60 mm
  • Mounting depth: 30.1 mm
  • Nominal Power Handling: 10 watts
  • Nominal Impedance: 4 Ohms
  • Sensitivity: 85.5 dB/w/m
  • Max linear excursion: +/- 2.0 mm
  • Vas: 0.3 L

BRAHMA 6W Specifications:

  • Frequency Response: 40Hz – 4kHz
  • Overall diameter: 165 mm
  • Cut-out diameter: 145 mm
  • Mounting depth: 78.3 mm
  • Nominal power handling: 80 watts
  • Nominal impedance: 4 Ohms
  • Sensitivity: 85 dB/w/m
  • Voice coil diameter: 35 mm
  • Max linear excursion: +/- 6 mm
  • Sd: 128.7sq cm
  • Vas: 11.13 L
  • Qts: 0.44
RM9,432.00

Avatar 6

  • 6.5" Polypropylene Cone
  • Powerful, high grade ferrite magnet
  • Dual layer Copper voicecoil on 25mm aluminium former
  • Efficient at 88 db per meter / per watt

Specifications:

  • Frequency Response: 50Hz – 5kHz
  • Overall diameter: 166mm
  • Cut-out diameter: 145mm
  • Mounting depth: 64 mm
  • Nominal power handling:  40 watts
  • Nominal impedance: 4 Ohms
  • Sensitivity: 88 dB/w/m
  • Voice coil diameter: 25mm
  • Xmax Point to Point:  11mm
  • Sd: 128.7sq cm
  • Vas: 20.35 L
  • Qts: 0.51

Avatar 3

  • 3" Polypropylene Cone
  • Powerful, high grade ferrite magnet
  • Dual layer Copper voicecoil on 20mm aluminium former
  • Integrated Protection Grill

Specifications:

  • Frequency Response: 150Hz – 15,000 hz
  • Overall diameter: 91mm
  • Cut-out diameter: 73.1mm
  • Mounting depth: 36 mm
  • Nominal power handling:  10 watts
  • Nominal impedance: 4 Ohms
  • Sensitivity: 85 dB/w/m
  • Voice coil diameter: 20.4mm
  • Linear Excursion Point to Point:  2mm
  • Sd: 29.3 sq cm
  • Vas: 1.15 L
  • Qts: 0.6

Avatar 1

  • 25mm Silk Dome Tweeter
  • Powerful, high grade neodymium magnet
  • Efficient at 91 db per meter / per watt

Specifications:

  • Frequency Response: 2,500Hz – 20,000 hz
  • Overall diameter: 55 mm
  • Cut-out diameter: 41 mm
  • Mounting depth: 21.5 mm
  • Nominal power handling:  8 watts
  • Nominal impedance: 4 Ohms
  • Sensitivity: 91 dB/w/m
  • Voice coil diameter: 25.5 mm
  • Linear Excursion Point to Point:  .3 mm
  • Qts: 1.57
RM2,760.00
  • 25mm Silk Dome Tweeter
  • Powerful, high grade neodymium magnet
  • Efficient at 91 db per meter / per watt
  • Frequency Response: 2,500Hz – 20,000 hz
  • Overall diameter: 55 mm
  • Cut-out diameter: 41 mm
  • Mounting depth: 21.5 mm
  • Nominal power handling:  8 watts
  • Nominal impedance: 4 Ohms
  • Sensitivity: 91 dB/w/m
  • Voice coil diameter: 25.5 mm
  • Linear Excursion Point to Point:  .3 mm
  • 6.5" Polypropylene Cone
  • Powerful, high grade ferrite magnet
  • Dual layer Copper voicecoil on 25mm aluminium former
  • Efficient at 88 db per meter / per watt
RM1,980.00
  • 3" Polypropylene Cone
  • Powerful, high grade ferrite magnet
  • Dual layer Copper voicecoil on 20mm aluminium former
  • Integrated Protection Grill

Specifications:

  • Frequency Response: 150Hz – 15,000 hz
  • Overall diameter: 91mm
  • Cut-out diameter: 73.1mm
  • Mounting depth: 36 mm
  • Nominal power handling:  10 watts
  • Nominal impedance: 4 Ohms
  • Sensitivity: 85 dB/w/m
  • Voice coil diameter: 20.4mm
  • Linear Excursion Point to Point:  2mm
RM780.00
Frequency response: 250Hz - 20kHz
Overall dimensions: 91mm
Cut-out diameter: 75mm
Mounting depth: 30.7mm
Nominal Power Handling: 15 watts
Nominal Impedance: 4 Ohms
Sensitivity: dB/w/m
Max linear excursion: +/-0.5mm
Minimum recommended sealed volume: 500-1000ml
RM3,388.00

RAM 1 Specifications:

  • Nominal Impedance: 4 ohm
  • Sensitivity: 90 db / w / m
  • Frequency Response: 2500 - 20,000 hz
  • Resonant Frequency: 1440   
  • Voice coil diameter: 25.5 mm
  • Voice coil height: 1.8 mm 
  • DC resistance: 3.3 ohm
  • Magnet system type: Neodymium

RAM 6A Specifications :

  • Nominal Impedance: 4 ohm
  • Sensitivity: 86.5 db / w / m
  • Frequency Response: 50 – 5000hz
  • Resonant Frequency: 52hzDC
  • resistance: 3.2 ohms
  • Magnet system type: High Grade Ceramic
RM3,958.00

RAM 2B  Specifications

  • Nominal Power Handling: 10 watts
  • Nominal Impedance: 4 ohm
  • Sensitivity: 85 db / w / m
  • Frequency Response: 200 - 20,000 hz
  • Resonant Frequency: 183 hz
  • DC resistance: 3.4 ohm
  • Magnet system type: Neodymium

RAM 6B Specifications :

  • Nominal Power Handling: 50 watts
  • Nominal Impedance: 4 ohm
  • Sensitivity: 86 db / w / m
  • Frequency Response: 50 – 5000 hz
  • Resonant Frequency: 52 hz
  • DC resistance: 3.3 ohms
  • Magnet system type: High Grade Ceramic
RM3,958.00
  • Normal Impedance : 6 ohm                   
  • DC resistance : 5.61 ohm                     
  • Voice coil inductance : 0.9 mH @1kHz  
  • Resonance frequency: 86 Hz                
  • Mechanical Q factor : 1.71                    
  • Electrical Q factor : 0.57                        
  • Total Q factor : 0.43                             
  • Moving mass(incl.air load) : 3.69 g
  • Suspension compliance : 0.93 mm/N    
  • Effective dome diameter : 7.1 cm         
  • Effective piston area : 39.5 sq.cm        
  • Equivalent volume Vas : 2.07 L           
  • Force factor : 3.69Tm
  • Linear excusion P-P : 10 mm
  • Max excusion P-P : 15 mm
  • Normal long term Power : 20 W
  • Instant(10ms) Max Power : 40 W
  • Sound Pressure Level/1m/1W : 85 dB
  • Recommended range 80-20k Hz
RM2,566.00
  • 2-way speaker
  • 25-75 Watt RMS
  • 80Hz – 20kHz frequency response
  • Tweeter: 25mm (1”) soft dome
  • Midwoofer: 165mm (6.5”), PP cone, 25mm voice coil, 90x10mm ,slim magnet , ventilated chassis , ported centre pole , optimized for HP 80Hz
  • Xover: 3 tweeter level
RM596.00
  • Minimum impedance : 4 Ohm
  • Frequency response : 63 Hz – 20 kHz
  • Power Demand : 25 – 100 Watt
  • Cosmetic appearance : Black with white lining
  • Tweeter cone size : 25 mm
  • Tweeter cone material : Soft fabric dome
  • Tweeter magnet : Neodymium
  • (Mid)woofer size : 165 mm (6.5 inch)
  • (Mid)woofer voice coil : 25 mm
  • (Mid)woofer cone material : Polypropylene
  • (Mid)woofer surround material : Butyl rubber
  • (Mid)woofer chassis : Ported, Stamped steel 0.7mm
  • Tweeter attenuation : 3 attenuation, Full L-pad
  • Passive xover design : Impedance compensation
RM1,288.00
  • Minimum impedance : 4 Ohm
  • Frequency response : 56 Hz – 20 kHz
  • Power Demand : 50 – 100 Watts
  • Cosmetic appearance : Black and White
  • Tweeter cone size : 25 mm
  • Tweeter cone material : Soft fabric dome
  • Tweeter magnet :Neodymium
  • Midrange size : 3 inch
  • Midrange voice coil : 20 mm, CCAW
  • Midrange cone material : Polypropylene
  • (Mid)woofer size : 165 mm (6.5 inch)
  • (Mid)woofer voice coil : 2 layer, 25 mm, CCAW
  • (Mid)woofer surround material : Butyl rubber
RM2,860.00
  • Minimum impedance : 4 Ohm
  • Frequency response : 56 Hz – 20 kHz
  • Power Demand : 50 – 100 Watts
  • Cosmetic appearance : Black and White
  • Tweeter cone size : 25 mm
  • Tweeter cone material : Soft fabric dome
  • Tweeter magnet :Neodymium
  • Midrange size : 3 inch
  • Midrange voice coil : 20 mm, CCAW
  • Midrange cone material : Polypropylene
  • (Mid)woofer size : 165 mm (6.5 inch)
  • (Mid)woofer voice coil : 2 layer, 25 mm, CCAW
  • (Mid)woofer surround material : Butyl rubber
RM2,360.00
  • Minimum impedance : 4 Ohm
  • Frequency response : 63 Hz – 20 kHz
  • Power Demand : 50 – 100 Watts
  • Cosmetic appearance : Satin aluminium
  • Tweeter cone size : 25 mm
  • Tweeter cone material : Soft fabric dome
  • Tweeter magnet : Neodymium
  • Tweeter chassis : Aluminum, Patented design
  • (Mid)woofer size : 177 mm (7 inch)
  • (Mid)woofer voice coil : 31 mm
  • (Mid)woofer cone material  : Polypropylene
  • (Mid)woofer surround material : Butyl rubber
  • (Mid)woofer chassis : Ported, Solid die cast aluminium
  • Tweeter attenuation : 3 attenuation, Full L-pad
  • Passive xover design : Bi – wire (2 input), Impedance compensation
RM3,288.00
  • Minimum impedance : 4 Ohm
  • Frequency response : 56 Hz – 20 kHz
  • Power Demand : 50 – 100 Watts
  • Cosmetic appearance : Dark blue with silver lining
  • Tweeter cone size : 25 mm
  • Tweeter cone material : Soft fabric dome
  • Tweeter magnet : Neodymium
  • Tweeter chassis : Aluminum, Patented design
  • Midrange size : 3 inch
  • Midrange voice coil : 20 mm
  • Midrange cone material : Polypropylene
  • Midrange surround material : Butyl rubber
  • Midrange chassis : Ported, Solid die cast aluminium
  • (Mid)woofer size : 177 mm (7 inch)
  • (Mid)woofer voice coil : 38 mm
  • (Mid)woofer cone material : Polypropylene
  • (Mid)woofer surround material : Butyl rubber
  • (Mid)woofer chassis : Ported, Solid die cast aluminium
RM3,980.00

DA-2.0CP

  • Rated Power : 10 Watts 
  • Maximum Power : 20 Watts 
  • Impedance : 4 Ohm 
  • Frequency Response : 200-20K Hz

DA-6.0CP

  • Rated Power : 60 Watts
  • Maximum Power : 120 Watts 
  • Impedance : 4 Ohm
  • Frequency Response : 45-5000Hz
RM1,888.00