| Type: | analogue symmetrical interconnect cable |
| Wave impedance: | 110 Ohm |
| Conductor: | 2 x 0.75 mm² (19 x 0.20 mm) twisted multi-stranded BRC conductors |
| Insulation: | 2-layer CAFPE® |
| Dielectric binding: | SASDB® |
| Shield: | X-Shield® |
| Jacket: | antistatic low-loss SPVC |
| Protective cover: | nylon sleeve |
| Outer diameter: | 10 mm |
| Тermination: | RCA/RCA or XLR/XLR with Classic V2 plugs |
| Available: | in standard terminated lengths |
| Country of origin: | made in Russia |
| Type: | analogue symmetrical interconnect cable |
| Wave impedance: | 110 Ohm |
| Conductor: | 2 x 0.75 mm² (19 x 0.20 mm) twisted multi-stranded BRC conductors |
| Insulation: | 2-layer CAFPE® |
| Dielectric binding: | SASDB® |
| Shield: | X-Shield® |
| Jacket: | antistatic low-loss SPVC |
| Protective cover: | nylon sleeve |
| Outer diameter: | 10 mm |
| Тermination: | RCA/RCA or XLR/XLR with Classic V2 plugs |
| Available: | in standard terminated lengths |
| Country of origin: | made in Russia |
| Type: | analogue symmetrical interconnect cable |
| Wave impedance: | 110 Ohm |
| Conductor: | 2 x 0.75 mm² (19 x 0.20 mm) twisted multi-stranded BRC conductors |
| Insulation: | 2-layer CAFPE® |
| Dielectric binding: | SASDB® |
| Shield: | X-Shield® |
| Jacket: | antistatic low-loss SPVC |
| Protective cover: | nylon sleeve |
| Outer diameter: | 10 mm |
| Тermination: | RCA/RCA or XLR/XLR with Classic V2 plugs |
| Available: | in standard terminated lengths |
| Country of origin: | made in Russia |
- Type: analogue coaxial interconnect cable
- Wave impedance: 75 Ohm
- Conductor: 0.70 mm² (19 x 0.23 mm) multi-stranded BRC conductor
- Insulation: 3-layer CAFPE®
- Shield: inner layer - 25 µ rolled copper foil, outer layer - >90% BRC braid
- Jacket: antistatic low-loss SPVC
- Outer diameter: 8 mm
- Termination: RCA/RCA with Special V2 plug
- Available: on spools and in standard RCA terminated lengths
- Country of origin: made in Russia
- Type: analogue coaxial interconnect cable
- Wave impedance: 75 Ohm
- Conductor: 0.70 mm² (19 x 0.23 mm) multi-stranded BRC conductor
- Insulation: 3-layer CAFPE®
- Shield: inner layer - 25 µ rolled copper foil, outer layer - >90% BRC braid
- Jacket: antistatic low-loss SPVC
- Outer diameter: 8 mm
- Termination: RCA/RCA with Special V2 plug
- Available: on spools and in standard RCA terminated lengths
- Country of origin: made in Russia
- Type: analogue symmetrical interconnect cable
- Wave impedance: 110 Ohm
- Conductor: 2 x 0.35 mm² (7 x 0.265 mm) twisted multi-stranded BRC conductors
- Insulation: 2-layer CAFPE®
- Dielectric binding: SDB
- Shield: X-Shield®
- Jacket: antistatic low-loss SPVC
- Protective cover: nylon sleeve, for the XLR/XLR variant only
- Outer diameter: 8.5 mm
- Termination: RCA/RCA with Special V2 plug or XLR/XLR with Classic V2 plug
- Available: on spools and in standard terminated lengths
- Country of origin: made in Russia
- Type: analogue symmetrical interconnect cable
- Wave impedance: 110 Ohm
- Conductor: 2 x 0.35 mm² (7 x 0.265 mm) twisted multi-stranded BRC conductors
- Insulation: 2-layer CAFPE®
- Dielectric binding: SDB
- Shield: X-Shield®
- Jacket: antistatic low-loss SPVC
- Protective cover: nylon sleeve, for the XLR/XLR variant only
- Outer diameter: 8.5 mm
- Termination: RCA/RCA with Special V2 plug or XLR/XLR with Classic V2 plug
- Available: on spools and in standard terminated lengths
- Country of origin: made in Russia
- Type: analogue symmetrical interconnect cable
- Wave impedance: 110 Ohm
- Conductor: 2 x 0.35 mm² (7 x 0.265 mm) twisted multi-stranded BRC conductors
- Insulation: 2-layer CAFPE®
- Dielectric binding: SDB
- Shield: X-Shield®
- Jacket: antistatic low-loss SPVC
- Protective cover: nylon sleeve, for the XLR/XLR variant only
- Outer diameter: 8.5 mm
- Termination: RCA/RCA with Special V2 plug or XLR/XLR with Classic V2 plug
- Available: on spools and in standard terminated lengths
- Country of origin: made in Russia
- Type: analog coaxial interconnect cable.
- Conductor: 2 x 0.35 mm² (7 x 0.265 mm) multi-stranded BRC conductors
- Insulation: 3-layer CAFPE®
- Shield: >90% BRC braid
- Jacket: antistatic low-loss SPVC
- Outer dimensions: 5 х 13 mm
- Termination: RCA/RCA with Standard 1 plug
- Available: on spools and in standard RCA terminated lengths
- Country of origin: made in Russia
- Type: analog coaxial interconnect cable.
- Conductor: 2 x 0.35 mm² (7 x 0.265 mm) multi-stranded BRC conductors
- Insulation: 3-layer CAFPE®
- Shield: >90% BRC braid
- Jacket: antistatic low-loss SPVC
- Outer dimensions: 5 х 13 mm
- Termination: RCA/RCA with Standard 1 plug
- Available: on spools and in standard RCA terminated lengths
- Country of origin: made in Russia
- Type: analog coaxial interconnect cable.
- Conductor: 2 x 0.35 mm² (7 x 0.265 mm) multi-stranded BRC conductors
- Insulation: 3-layer CAFPE®
- Shield: >90% BRC braid
- Jacket: antistatic low-loss SPVC
- Outer dimensions: 5 х 13 mm
- Termination: RCA/RCA with Standard 1 plug
- Available: on spools and in standard RCA terminated lengths
- Country of origin: made in Russia
- Type: analog coaxial interconnect cable.
- Conductor: 2 x 0.35 mm² (7 x 0.265 mm) multi-stranded BRC conductors
- Insulation: 3-layer CAFPE®
- Shield: >90% BRC braid
- Jacket: antistatic low-loss SPVC
- Outer dimensions: 5 х 13 mm
- Termination: RCA/RCA with Standard 1 plug
- Available: on spools and in standard RCA terminated lengths
- Country of origin: made in Russia
This versatile copper speaker wire is offered in the mostly used 2.5 mm² (14 AWG) size. Precise inter-wire tension and strand conformity derived from the advanced BRC conductor weave arrangement contribute to stress-free amplifier-speaker matching without audible limitations. The major design sophistication is the 2-layer CAFPE® conductor insulation with the extended and more homogeneous inner air-foamed PE layer. Easily bisectable SPVC jacket simplifies concealed wiring and termination. Special 2.5 Speaker Wire is intended for basic Home Audio & Multimedia connections, which demand wide and flat frequency response. With beautifully balanced tonality, plenty of dynamics and captivating musicality it is one of the finest examples in its class.
| Type: | speaker wire with parallel conductor layout |
| Conductror: | 2 x 2.50 mm² (98 x 0.18 mm) multi-stranded BRC conductors |
| Insulation: | 2-layer CAFPE® with the extended inner air-foamed PE layer |
| Jacket: | antistatic low-loss SPVC |
| Outer dimensions: | 5 x 12 mm |
| Available: | on spools |
| Country of origin: | made in Russia |
*WE ARE SELLING WITH PER METER. THANK YOU
It is a versatile copper speaker wire offered in a 4.0 mm² (12 AWG) size. The enlarged cross-section and the advanced BRC conductor weave arrangement with the precise inter-wire tension and strand conformity minimize the overall active resistance and ensure efficient amplifier-speaker matching regardless of their design ethos and specification. The major design sophistication is the 2-layer CAFPE® conductor insulation with the extended and more homogeneous inner air-foamed PE layer. Easily bisectable SPVC jacket simplifies concealed wiring and termination. Special 4.0 Speaker Wire is recommended for basic Home Audio & Multimedia connections, where authoritative full frequency range presentation with a lower bass expression is at a premium.
| Type: | speaker wire with parallel conductor layout |
| Conductror: | 2 x 4.00 mm² (161 x 0.18 mm) multi-stranded BRC conductors |
| Insulation: | 2-layer CAFPE® with the extended inner air-foamed PE layer |
| Jacket: | antistatic low-loss SPVC |
| Outer dimensions: | 6.4 x 14.8 mm |
| Available: | on spools |
| Country of origin: | made in Russia |
*WE ARE SELLING WITH PER METER.THANK YOU
This is no doubt a class-leading high current DC power supply cable for the sophisticated on-board Multimedia. It is built around a large-scale sole BRC conductor with the advanced multi-strand weave arrangement and robust insulation, performed of the Russian-made low-loss neutral PVC (NPVC) with the unrivalled dielectric and mechanical properties. Widely used in the medical industry, NPVC offers improved elasticity, high mechanic vibration and acoustic noise protection, as well as excellent resistance to abrasions, tears, temperature fluctuations and aggressive chemicals. Available in 1 applicable gauges: 8 AWG (8.50 mm²), Standard DC Power guarantees flawless power transmission with easily perceptible improvement in dynamics and transient speed.
| Type: | power cable for high current 12-24V DC applications |
| Conductor: | multi-stranded BRC conductor gauges: 8 AWG (8.50 mm²) |
| Jacket: | low-loss NPVC |
| Outer diameter: | 7.4 mm (8 AWG) |
| Available: | 8 AWG |
| Country of origin: | made in Russia |
*CURRENTLY WE ARE INSTOCK WITH RED COVER ONLY AND WE ARE SELLING WITH PER METER. THANK YOU
Tchernov Supreme 1.0 Speaker Wire
Standard 1.0 Speaker Wire is perfectly suited for specified on-board component speaker connections in a confined trunking and cable management systems, as well as for internal speaker and crossover wiring upgrades. Awesome flexibility derived from the advanced Multiwire conductor arrangement and a streamlined easily bisectable jacket profile simplifies the use of Standard 1.0 Speaker Wire even in hard to reach places.
SIZE : 1.0 mm² (17 AWG)